Source + Load Integrated Testerxxxx
SPL Series
-
Power
60V/10A/300W -
Load
600V / 15A / 150W -
Interface
USB / RS232 or RS485 (one selectable) -
Dispaly
2.8-inch IPS
Product Description
SPL Series
● DC power supply and electronic load in one unit. The source and load can operate independently or together, supporting battery charge, discharge, and cycle testing.
● Delivers up to 300 W source output and 150 W electronic load capacity, suitable for basic testing of AC/DC and DC/DC modules, power adapters, and low-voltage USB-powered devices.
● Supports CC, CV, CR, and CP operating modes, along with dynamic load testing, short-circuit simulation, and Von/Voff load control, enabling verification under steady-state, transient, startup, and abnormal operating conditions.
● Compact and portable design for flexible use across a wide range of test benches and workstations.
● Equipped with a 2.8-inch IPS display for real-time monitoring of voltage and current waveforms on both the source and load sides, making on-site debugging, training demonstrations, and preliminary troubleshooting more convenient.
● Optional functions include battery charge/discharge and cycle testing, OCP and OPP testing, and ripple testing
● Integrated OVP, OCP, OPP, and OTP protection helps protect both the instrument and the device under test (DUT).
● Provides USB Type-C and RS232 or RS485 communication interfaces, with support for SCPI and Modbus RTU protocols.
- Product Advantages
- Model Comparison
- Configure Your Instrument
- Related Downloads
- Related Products
-

Source and Load in One,A Compact Tool for Charge–Discharge Testing
300 W power supply + 150 W electronic load in one compact unit. Operate independently or in coordinated source-load mode for adapter, DC/DC converter, low-voltage USB device, and battery charge–discharge testing.
All-in-One Electronic Load for One-Stop Full-Operating-Condition Verification
CC/CV/CR/CP + Advanced Dynamic Testing. Complete Full-Operating-Condition Verification on a Single Unit.


Real-Time Source & Load Waveform Visualization
Equipped with a built-in 2.8-inch IPS display that presents the source-side and load-side voltage and current waveforms simultaneously on a single screen, making dynamic responses clearly visible.
Standalone Charge/Discharge Cycling with Precise Capacity & SOH Assessment
Leveraging integrated source-load coordinated control, a single unit automatically executes battery charging, discharging, and repetitive cycling tests. This eliminates the need for multiple external instruments or tedious cable swapping.


Automated OCP / OPP Testing
Built-in automated Overcurrent Protection (OCP) and Overpower Protection (OPP) test routines systematically increase current or power in programmed steps, replacing manual tuning with standardized execution.
Oscilloscope-Free Direct Ripple Readout
Supports direct connection between the power source and the load without tedious oscilloscope probes or complex setups. Directly captures and displays full voltage ripple metrics (Vpp / Vpp+ / Vpp-)and current ripple metrics(Ipp / Ipp+ / Ipp-).Streamlined Screening for R&D and Production.


Versatile Communication Interfaces for Seamless Integration
USB Type-C & Selectable RS232/RS485.Standard SCPI & Modbus-RTU Compliant. Seamless ATE & System Integration.
-
Model Power Supply Rating Electronic Load Rating SPL30150-1
0-30V丨0-10A丨150W 0-150V丨0-10A丨150W SPL30300-1
0-30V丨0-10A丨150W 0-300V丨0-10A丨150W SPL30600-1
0-30V丨0-10A丨150W 0-600V丨0-10A丨150W SPL60150-1
0-60V丨0-10A丨150W 0-150V丨0-10A丨150W SPL60300-1
0-60V丨0-10A丨150W 0-300V丨0-10A丨150W SPL60600-1
0-60V丨0-10A丨150W 0-600V丨0-10A丨150W SPL30150-3
0-30V丨0-10A丨300W
0-150V丨0-10A丨150W
SPL30300-3
0-30V丨0-10A丨300W
0-300V丨0-10A丨150W
SPL30600-3
0-30V丨0-10A丨300W
0-600V丨0-10A丨150W
SPL60150-3
0-60V丨0-10A丨300W
0-150V丨0-10A丨150W
SPL60300-3
0-60V丨0-10A丨300W
0-300V丨0-10A丨150W
SPL60600-3
0-60V丨0-10A丨300W
0-600V丨0-10A丨150W
Product Category
-
Digital Multimeter
-
Waveform Generator
-
Smart Meter
-
Electronics Load
-
Power Meter
-
LCR meter
-
RF Signal Generator
AI
